Home

Coming soon... Performance packages for your Mustang GT, Shelby and COBRA - 450hp to 1000hp

 

Page best viewed in full screen

Home
Up
PMP News Page
CATALOG
WARRANTY
SHOP SERVICE
LINKS
NEW SPECIALS
GET A QUOTE
SCHEDULE SERVICE

 

Made from 4130 Chrome Moly material this brace is specifically designed for the S197 Mustang. It ties together the inner/outer frame rails and the rear lower control arm mount. Braces are Yellow zinc plated and come with mounting hardware. Can be bolted with supplied hardware but a welded installation is recommended for maximum benefit from this brace.
 

3 Point Frame Rail & Torque Box Brace '05-'06

$239.95 +S&H

 

Installation available

 

Stage I drag pak suspension package for the '05-'07 platform lays the foundation for you to hook up and go straight.  Included is 3 essential elements needed for performance at the strip.
 

'05-'07 Drag Pak - Stage 1

$579.99 +S&H

Installation available

 

Stage II drag pak suspension package is an inexpensive upgrade from a good foundation laid in Stage I.  Most of the upgrades include Teflon lined rod ends replacing your urethane bushing ends and chassis supports 

'05-'07 Drag Pak - Stage 2

$474.99 +S&H

Installation available

 

Sport Springs: Lowers vehicle approx 1 inch in front and 1 1/4 in rear. The rear of the vehicle sits higher than the front in factory form, shifting weight towards the front. Sport springs provide better weight distribution. Higher frequency rates reduce body roll and nosedive for improved handling while maintaining great ride quality.

Strut Tower Brace and G-Trac brace: These braces stiffen the front body structure to stabilize the suspension during hard cornering by eliminating flex.

Adjustable Panhard Rod: Adjustable for length to help adjust rear end alignment. Urethane bushings reduce flex improving steering response and lateral axle control.

'05-'07 G-Trac Suspension Kit - Stage 1

$589.95 +S&H

Installation available

 

This kit will further improve the suspension providing greater off the line and corner exit traction, improved tunable shock valving, and better steering response and balance with the following components:

Tokico D-SPEC shocks and struts - These adjustable shocks have infinite, simultaneous adjustment of compression and rebound dampening. Their wide
adjustment range makes then truly a multi-use product that can be adjusted for street or race use.

Billet rear lower trailing arms: These aluminum arms keep unsprung weight down and noticeably improve off the line and corner exit traction without adding unwanted NVH (noise, vibration, and harshness). Unlike previous Mustangs these arms can also be seen through the wheel well and look awesome, giving your suspension the "WOW" factor at the track and car shows.

Rear Swaybar: Larger than O.E. rear swaybar provides better rear compliance
and reduces under steer improving handling balance.

'05-'07 G-Trac Suspension Kit - Stage 2

$1349.95 +S&H

Installation available


Stage 3 continues to build on Stages 1 and 2. Stage 3 combined with 1 and 2 transforms your Mustang into a World Class sports car capable of handling reserved for cars costing tens of thousands of dollars more! The following components compose Stage 3:

Adjustable Front Swaybar: A full 1 3/8 tubular unit. This swaybar is the lightest aftermarket bar in the industry. It has 3 position adjustment to dial in vehicle balance. Comes with urethane bushings and is a direct bolt on.

Front Street Adjustable Swaybar Endlinks: Replace the factory fixed endlinks. Provides ability to further fine tune front swaybar balance and are stronger than the factory endlinks.

Front Swaybar Mount Brace: These braces eliminate rotation of the front swaybar and yield better swaybar compliance.

Front Bump Steer kit: Corrects bump steer in the front suspension. Directly replaced outer tie rod end. Tapered shaft design for hassle free installation that required no drilling of the spindle.

Adjustable rear upper 3rd link: This part allows the ability to set pinion
angle and eliminate the torque deflection of the factory piece. Direct replacement for factory rear upper 3rd link.

3-point Frame Rail and Torque Box brace: This brace ties the rear inner and outer frame rails to the rear torque box (lower trailing arm mounting point). Stiffens the chassis and torque box mounting point for improved handling and stability.
 

'05-'07 G-Trac Suspension Kit - Stage 3

$899.95 +S&H

Installation available


 

 

Send mail to webmaster@promodularperformance.com with questions or comments about this web site.
Copyright © 2005 Pro Modular Performance Inc.